Hanna-instruments HI 83214 Manuel d'utilisateur télécharger pdf (Page 15)

OPERATIONAL GUIDE

POWER CONNECTION

Connect the AC/DC adaptor that is supplied with the instrument.

Note: Always turn the meter off before unplugging it to ensure no data is lost.

METHOD SELECTION

• Turn the instrument ON via the ON/OFF power switch.

• The meter will perform an autodiagnostic test. During this test, the Hanna Instrument logo will appear

on the LCD. After 5 seconds, if the test was successful, the last method used will appear on the display.

• In order to select the desired method press the METHOD key and the screen with the list of methods

will appear.

• Press the s t keys to highlight the desired method. Press Select.

• After the desired method is selected, follow the measurement procedure described in the related chapter.

• Before performing a test carefully read all the instructions related to the selected method.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 71 72

Pas de commentaire

Hanna-instruments HI 83214 Manuel d'utilisateur Page 15