Hanna-instruments HI 2216 Manuel d'utilisateur télécharger pdf (Page 22)

- or the number of days until the calibration alarm will be displayed.

- or if expired (7 days ago).

• The instrument ID.

Notes: • If a one-point calibration is performed after a two-point

calibration, the instrument will keep the old slope.

• If “no bUF” message appears on the LCD, the instrument

informs you that calibration was performed at only one

point.

• Press GLP at any moment and the instrument will return to

measurement mode.

• If calibration has not been performed, the instrument

displays “no CAL” message blinking.

LAST RELATIVE mV CALIBRATION DATA

Last Relative mV calibration data is stored automatically after a successful

calibration.

To view the Relative mV calibration data, press GLP while in Relative mV

measurement mode.

The instrument will display the Relative mV GLP information and the

time (hh:mm:ss) of the last Rel mV calibration.

Use the ARROW keys to scroll through the calibration data:

• The Relative mV calibration date.

• The Relative mV calibration offset.

• The instrument ID.

Notes: • Press GLP to return to measurement mode.

• If calibration has not been performed, the instrument

displays “no CAL” message blinking.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 51 52

Pas de commentaire

Hanna-instruments HI 2216 Manuel d'utilisateur Page 22