Hanna-instruments HI9126 Manuel d'utilisateur télécharger pdf (Page 9)

16 17

The instrument allows the user to configure several parameters

through the Setup Menu.

To enter the Setup Menu, while in measurement mode, press and

hold the SETUP key for about 5 seconds.

Once the menu is entered, each parameter can be changed by using

the arrow keys; then pressing the CFM key will confirm the value and

scroll to the next parameter.

1. Audible signal: On (default) or Off

2. Auto-off feature: 20 minutes (default) or disabled

3. Temperature measure unit: ºC (default) or ºF

SETUP MENUSETUP MENU

SETUP MENU

4. Calibration segments: On (default) or Off. This enables or disables

the bargraph, the “CLEAN ELECTRODE” message and the buffer

segments.

5. Calibration time-out: 1 (default) to 14 days or disabled (0 days)

After the last parameter, press the CFM key to confirm the setting

and return to measurement mode.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17

Pas de commentaire

Hanna-instruments HI9126 Manuel d'utilisateur Page 9