Hanna-instruments HI 98170 Manuel d'utilisateur télécharger pdf (Page 29)

AutoEnd

To freeze the first stable reading on the LCD press

AutoEnd while the instrument is in measurement

mode.

The ”HOLD” tag will be displayed blinking on the

LCD until the reading will stabilize.

When the reading is stable, the “HOLD” tag stops blinking and the reading

is frozen on the LCD.

Press AutoEnd again to return to normal measurement mode.

Note: Pressing 2nd then MODE the instrument will skip to the displayed range,

without leaving AutoEnd mode. The LOG key also holds AutoEnd mode.

Pressing2nd then SETUP, GLP or RCL, the instrument leaves AutoEnd

mode and performs the selected function.

AutoEnd CLR

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 51 52

Pas de commentaire

Hanna-instruments HI 98170 Manuel d'utilisateur Page 29