Hanna-instruments HI 2214 Manuel d'utilisateur télécharger pdf (Page 29)

INSTRUMENT ID

Press CAL when the “InId” is displayed. The instrument ID (“0000“ to

“9999“) and “CFM” will start blinking.

Press the ARROW

keys to change the instrument ID value.

Press CFM to save the modified instrument ID value.

Press CAL to escape without saving.

Note: The instrument ID is downloaded to a PC as part of a logged

data, set to identify its origin.

TEMPERATURE UNIT

Press CAL when “tnP“ is displayed. The temperature unit and “CFM”

will start blinking.

Press the ARROW keys to change the option.

Press CFM to save the modified temperature unit.

Press CAL to escape without saving.

Press the ARROW

keys to change the beep status (On or OFF).

Press CFM to save the modified beep status.

Press CAL to escape without saving.

When enable, beep sounds as a short beep every time a key is pressed or

when the calibration can be confirmed.

A long beep alert that the pressed key is not active or a wrong condition

is detected while in calibration.

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 47 48

Pas de commentaire

Hanna-instruments HI 2214 Manuel d'utilisateur Page 29