Hanna-instruments HI 98127 Manuel d'utilisateur télécharger pdf

www.hannainst.com

Hanna Instruments reserves the right to modify the design, con-

struction and appearance of its products without advance notice.

WARRANTY

HI 98127 and HI 98128 are warranted for one

year against defects in workmanship and materials

when used for their intended purpose and maintained

according to instructions. The electrode is war-

ranted for a period of six months. This warranty is

limited to repair or replacement free of charge.

Damages due to accident, misuse, tampering or lack

of prescribed maintenance are not covered.

If service is required, contact the dealer from whom

you purchased the instrument. If under warranty,

report the model number, date of purchase, serial

number and the nature of the failure. If the repair is

not covered by the warranty, you will be notified of

the charges incurred. If the instrument is to be re-

turned to Hanna Instruments, first obtain a Returned

Goods Authorization Number from the Customer

Service department and then send it with shipment

costs prepaid. When shipping any instrument, make

sure it is properly packaged for complete protection.

All rights are reserved. Reproduction in whole or in

part is prohibited without the written consent of the

Rhode Island, 02895 , USA.

Instruction Manual

HI 98127 - HI 98128

Waterproof

pH & Temperature Meters

Remove the instrument from the packing material

and examine it carefully. If any damage has occurred

during shipment, immediately notify your Dealer or

the nearest Hanna Customer Service Center.

Each meter is supplied with:

• HI 73127 pH electrode

• HI 73128 Electrode removal tool

• 4 x 1.5V batteries

Note: Conserve all packing material until the instru-

ment has been observed to function correctly.

Any defective item must be returned in its

original packing.

PRELIMINARY EXAMINATION

HI 98127 and HI 98128 are waterproof pH and

temperature meters. The housing has been completely

sealed against humidity and designed to float.

All pH readings are automatically temperature com-

pensated (ATC), and temperature values can be displayed

in °C or °F units.

The meters can be calibrated at one or two points with

auto-buffer recognition and against five memorized

buffer values.

Measurements are highly accurate with a unique sta-

bility indicator right on the LCD.

These meters are also provided with battery level

indication at start-up, and with a low battery symbol

which warns the user when the batteries need to be

replaced. In addition the Battery Error Prevention

System (BEPS) avoids erroneous reading caused by low

voltage level by turning the meter off.

The HI 73127 pH electrode, supplied with the meters,

is interchangeable and can be easily replaced.

The stainless steel encapsulated temperature sensor fa-

cilitates faster and more accurate temperature

measurement and compensation.

GENERAL DESCRIPTION

FUNCTIONAL DESCRIPTION

1. Battery compartment

2. Liquid Crystal Display (LCD)

3. ON/OFF/MODE button

4. HI 73127 pH electrode

5. Temperature sensor

6. SET/HOLD button

These Instruments are

in Compliance with

CE Directives

CE DECLARATION OF CONFORMITY

Recommendations for Users

Before using this product, make sure that it is

entirely suitable for the environment in which it is

used.

The glass bulb at the end of the electrode is sensitive

to electrostatic discharges. Avoid touching the glass

bulb at all times.

Any variation introduced by the user to the supplied

equipment may degrade the instrument’s EMC per-

formance.

To avoid electrical shock, do not use this instrument

when voltages at the measurement surface exceed

24 VAC or 60 VDC. To avoid damages or burns, do

not perform any measurement in microwave ovens.

ACCESSORIES

HI 73127 Replaceable pH electrode

HI 73128 Electrode removal tool

HI 70004P pH 4.01 solution, 20 mL sachet (25 pcs)

HI 70006P pH 6.86 solution, 20 mL sachet (25 pcs)

HI 70007P pH 7.01 solution, 20 mL sachet (25 pcs)

HI 70009P pH 9.18 solution, 20 mL sachet (25 pcs)

HI 70010P pH 10.01 solution, 20 mL sachet (25 pcs)

HI 77400P pH 4 & 7 solutions, 20 mL sachet (5 each)

HI 7004M pH 4.01 solution, 230 mL bottle

HI 7006M pH 6.86 solution, 230 mL bottle

HI 7007M pH 7.01 solution, 230 mL bottle

HI 7009M pH 9.18 solution, 230 mL bottle

HI 7010M pH 10.01 solution, 230 mL bottle

HI 7061M Electrode cleaning solution, 230 mL bottle

HI 70300M Electrode storage solution, 230 mL bottle

1. Automatic temperature compensation

indicator

2. Stability indicator

3. Battery life percentage indicator

4. Low battery indicator

5. Secondary display

6. Primary display

7. Measuring unit for primary display

ISTR98127R4 03/03

US DESIGN PATENT

D462,024

Dear Customer,

Thank you for choosing a Hanna product. This

manual will provide you with the necessary informa-

tion for correct operation. Please read it carefully

before using the meter.

If you need additional technical information, do not

hesitate to e-mail us at [email protected].

These instruments are in compliance with the

directives.

1 2

HI 98127 - HI 98128 1
(@20°C/68°F) 2

Résumé du contenu

Page 1 - HI 98127 - HI 98128

www.hannainst.comHanna Instruments reserves the right to modify the design, con-struction and appearance of its products without advance notice.WARRAN

Page 2 - (@20°C/68°F)

Notes:• Before taking any measurements make sure themeter has been calibrated (CAL tag present on theLCD).• If measurements are taken in different sam

Modèles reliés HI 98128

Commentaires sur ces manuels

Pas de commentaire

Hanna-instruments HI 98127 Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Thermomètres Hanna-instruments HI 98127. Hanna Instruments HI 98127 User Manual Manuel d'utilisatio

Résumé du contenu

Modèles reliés HI 98128

Commentaires sur ces manuels

Produits connexes et manuels pour Thermomètres Hanna-instruments HI 98127